1 Suitable for battery size: length * width * height (maximum 508X271X206 mm) (minimum151x65x93mm / mm) 2.Capacity :90 ~ 120 PCS / h 3.Power supply and power ::3 phase,400V, single phase,230V 2.5KW 4.Gas source and dosage 0.5MPa < 0.1Mpa, filtered and dried compressed air 5.Equipment shape size: (length x width x height) 1350mmX1060mmX1380mm (taking physical object as standard) 6. Quantitative accuracy :The error of mixing agent A and agent B is (±3%) and the error of gum yield is (±3%). According to A:B, = 100:45 tentatively 7. worktable height :720 + 30mm (right-left) 8.Functions and Requirements 8.1. Conveying, positioning and clamping, lifting and translation, and then flipping. The battery cover with glue dispensing in the tank is placed below to meet the sealing requirements. 8.2. Transportation is carried by stainless steel drum with scratch-proof battery guardrail on both sides. 8.3. The clamping range of the positioning clamping device can be adjusted according to the type. 8.4. The equipment has three workstations, one is positioning and clamping, lifting the battery; the second workstation moves the battery above the workstation, the battery drops, and the battery cover is pushed up to meet the closure; the third workstation sends out the closed battery. 8.5. After closing the cover, the battery is sent out through the roller. 8.6. Equipments are equipped with safety doors to prevent body parts from penetrating into equipment and causing potential safety hazards. 8.7. Glue-dispensing rear cover for 1X3 or 2X6 narrow and long batteries. 8.8. The lifting is driven by cylinder, with air pressure relief and backflow preventive valve, so as to avoid damaging the battery by air-cut. 8.9. Equipment carbon steel quality, surface spray treatment. 8.10. The remaining unspecified items shall be implemented in accordance with industry standards. 9.Spare parts: 9.1.Pneumatic components: AirTAC Solenoid valve: AirTAC Motor: BECKER Reducer Motor: Quantitative Use of Precision Reducer Main electrical components: push button, contactor, relay (S-chneider); PLC, touch screen (Mitsubishi) 10.Customer need offer below information and sample: 10.1 Battery container and lid drawing. 10.2 5 sets of battery containers and covers for machine testing.
Audited Supplier 
){kind=link}