Diesel Generator Set
Common power (KW/KVA): 800/1000
Rated output voltage (V): three-phase four-wire system 400/230
Frequency (Hz): 50
Rated speed (RPM): 1500
Rated power factor: 0.8 (lag)
Type: brushless excitation, automatic speed regulation, voltage regulation
Insulation class: H class
Protection level: IP22
Set weight (kg) : 11800
Set size: (length × width × height) 6000*2200*2580 mm
Fuel consumption rate (L/ H) : 200
Start and stop mode: manual/automatic adjustable
Unit overhaul time (H): > 10000
Diesel Engine
Engine Model: KT30G1380TLD
Engine brand: CR
Origin of engine: Fujian, China
Cylinder diameter (mm): 138
Cylinder stroke (mm): 168
Cylinder quantity: 12 cylinders
Arrangement: V type
Type: Turbo - charged, water - air cold
Cooling mode: with fan tank closed water cooling heat dissipation
Speed regulation: electronic speed regulation
Start mode: 24V DIRECT current start
Brushless AC Generator
Engine brand: CR
Generator model/Power: 1000KVA
Origin of generators: Fujian
Excitation mode: brushless self-excitation (with automatic voltage regulator)
Insulation class: H class
Protection level: IP22
Voltage (V): 400/230
Voltage fluctuation rate (%) : ≤0.5%
Voltage transient adjustment rate (%): +20% ~ -15%
Voltage steady-state adjustment rate (%) : ≤±0.25%
Voltage stability time: 4S
Frequency (RPM): 1500
Frequency volatility (%) : ≤0.5%
Frequency transient adjustment rate (%): +10% ~ -7%
Frequency steady-state adjustment rate (%): 0~5% (adjustable)
Frequency stabilization time: 3S
Waveform distortion: ≤5%
No-load voltage setting range: 95%~105% rated voltage
Short circuit maintenance current: 300% In 2 seconds
Self-starting Control System
Brand: SmartGen
Function: SmartGen module is the automatic control module of the generator set. Modules can be used to start and stop the unit manually, automatically, and to indicate the status and failure of the unit.
Front panel LED flashing indicator: automatic stop and other generator set faults.
The working state of the module can be selected by the button switch installed on the front panel (stop, automatic, manual).
The module is controlled by microprocessor to provide comprehensive unit monitoring, operation status and operation parameter display. You can use the P810 interface to connect to the computer to change Settings while providing real-time diagnostics.
With standard RS232/RS485 communication interface, the function of industrial standard communication can be realized.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Audited Supplier 
){kind=link}