Common power (KW/KVA): 400/500 Rated output voltage (V): three-phase four-wire system 400/230 Frequency (Hz): 50 Rated speed (RPM): 1500 Rated power factor: 0.8 (lag) Type: brushless excitation, automatic speed regulation, voltage regulation Insulation class: H class Protection level: IP22 Set weight (kg) : 4600 Set size: (length × width × height) 4600*1650*2350 mm Fuel consumption rate (L/ H) : 198 Start and stop mode: manual/automatic adjustable Unit overhaul time (H): > 10000
Diesel Engine Engine Model: KT27G755TLD Engine brand: CR Origin of engine: Fujian, China Cylinder diameter (mm): 135 Cylinder stroke (mm): 150 Cylinder quantity: 12 cylinders Arrangement: V type Type: Turbo - charged, water - air cold Cooling mode: with fan tank closed water cooling heat dissipation Speed regulation: electronic speed regulation Start mode: 24V DIRECT current start
Brushless AC Generator Engine brand: CR Generator model/Power: 500KVA Origin of generators: Fujian Excitation mode: brushless self-excitation (with automatic voltage regulator) Insulation class: H class Protection level: IP22 Voltage (V): 400/230 Voltage fluctuation rate (%) : ≤0.5% Voltage transient adjustment rate (%): +20% ~ -15% Voltage steady-state adjustment rate (%) : ≤±0.25% Voltage stability time: 4S Frequency (RPM): 1500 Frequency volatility (%) : ≤0.5% Frequency transient adjustment rate (%): +10% ~ -7% Frequency steady-state adjustment rate (%): 0~5% (adjustable) Frequency stabilization time: 3S Waveform distortion: ≤5% No-load voltage setting range: 95%~105% rated voltage Short circuit maintenance current: 300% In 2 seconds
Self-starting Control System Brand: SmartGen Function: SmartGen module is the automatic control module of the generator set. Modules can be used to start and stop the unit manually, automatically, and to indicate the status and failure of the unit. Front panel LED flashing indicator: automatic stop and other generator set faults. The working state of the module can be selected by the button switch installed on the front panel (stop, automatic, manual). The module is controlled by microprocessor to provide comprehensive unit monitoring, operation status and operation parameter display. You can use the P810 interface to connect to the computer to change Settings while providing real-time diagnostics. With standard RS232/RS485 communication interface, the function of industrial standard communication can be realized.