Curing & Drying Chamber (LPG heating)
Composition:
This curing and drying chamber consists of main chamber, heating chamber, main controller, electric cabinet, etc. There is hot air circulation system, heating system, humidification system, temperature and moisture measuring system, air inlet and outlet system in the main chamber and heating chamber.
Technical Performance:
1. The process of both curing and drying can be completed together but also can be independently.
2. The imported temperature and moisture converter is with high temperature resistance, anti-mist, dust-proof, with long service life.
3. It adopts human machine interface and PLC control, with programmable functions, can be pre-stored 30 different sets of process parameters, each set is composed of up to 10 segments, maximum execution time is 999 minutes.
4. It adopts high efficiency atomizing nozzle and high efficiency high-power gas burner, the temperature and moisture can rise quickly. During low temperature curing, the switching time from one stage to be stable to another stage with different temperature and moisture is less than 30 minutes.
5. The circulating air system adopts the three-dimensional air distribution methods; it adopts high air flow of drum-type circulation fan, the moisture and temperature will be uniform throughout the curing room. After drying and curing, physical and chemical indicators of the plates is in good consistency. Temperature deviation in different point: ≤ 1.5 ºC, moisture deviation ≤ 3% RH.
6. With the alarm function for over temperature limit, ensuring the plate quality.
7. It adopts natural gas heating.
8. The wall plate can be disassembled, convenient for movement.
9. The wall body is with good thermal insulation performance, saving energy.
10. The atomizing chamber is separate, so the water drop without atomization will not spray to the plates.
11. It has power failure memory.
12. It adopts atomized water as humidification.
13. Control range
Temperature: room temperature to 85ºC, Moisture: ≥75%RH
14. Deviation between the setting valve and real value:
Temperature: ≤±1ºC, Moisture: ≤±2%RH
15. Power: 7.5KW
Compressed air: 0.4Mpa~0.6Mpa
Water pressure: ≥0.2Mpa
Supply Range:
1. Electrical control cabinet 1pc
1.1 PLC: 1pc Brand: Taiwan Delta
1.2 Temperature and moisture transmitter: 1pc Brand: Japan Shinko
1.3 Temperature and moisture sensor: 1pc Made in Taiwan
2. Electric actuating mechanism 1pc Model: EL3500
3. LPG burner 1set
4. Circulation blower: 1pc
Power: Motor 7.5KW, 960r/min, three phases, 380V50HZ
Material: stainless steel
5. Main Chamber: 1pc
Overall dimension (Width*Depth*Height): 3500*3000*3000mm
Material: inner surface is 0.5mm stainless steel, outer surface is steel color plate, and middle is polyurethane thermal insulation material;
Structure: assembled type, dismountable
6. Subsidiary Chamber: 1pc
Material: inner surface is stainless steel, outer surface is steel color plate, and middle is polyurethane thermal insulation material; circulation air channel is 1mm stainless steel.
7. Door 1pair
Equipped with aging resistance seal ring, firm and flexible
8. High efficiency atomizing nozzle 7pcs
Material: stainless steel
Audited Supplier 
){kind=link}