PE Film Shrinkage Machine
Equipment parameters and configuration
Product Description:
- Taiwan AIRTAC cylinder, The ROKO photoelectric control the feeding and whole set of actions, stable and reliable.
- The induction switch controls the length of the feed, which effectively reduces the loss.
- The cutter has an automatic protection function, which can effectively prevent the package from being cut by mistake and ensure the safety of the operator.
- Equipped with worm gear reducer, film feeding is stable.
- "DELAT" PLC programmable controller automatic cycle control.
- PVC conveyor belt is resistant to abrasion and high strength.
- High-power dual-transport wind motor to ensure sufficient circulating air volume.
- Super large air volume cooling system, the product is quickly cooled and shaped after heat shrinkage.
- The conveyor belt is equipped with frequency converter imported from Taiwan Delta, with stepless speed change.
- Galvanized roller, high temperature resistant silica gel jacket, strong and stable.
- The horizontal height of the whole machine frame can be adjusted by +/-50mm, which is convenient for the connection of the front and rear processes
Scope of application:
It is suitable for bottomless or bottomless heat-shrink packaging of carton, pop can, mineral water, paper box and other bottled canned products.
Fully automatic PE film shrinkage machine
| Model: |
BT-6050 Fully automatic PE film shrinkage machine |
| Height of working table: |
850+/-50mm |
| Maximum packaging size: |
L500×W200×H400mm |
| Packing speed: |
3~8 pcs/minute |
| Power supply: |
Three-phase three-wire system 380V 50Hz/1800W |
| Air source: |
0.5~0.7MPa |
| Cutting time/temperature: |
0.5~1.5S / Constant temperature |
| Film width/thickness: |
MAX800mm/0.05~0.15mm |
| Dimensions: |
L1800×W1200×H1900mm |
| Net weight: |
About 600kg |
Hot air constant temperature shrinking chamber
| Model: |
Hot air constant temperature shrinking chamber |
| |
Transfer speed: |
Max:20(m/min) |
| |
Chamber size: |
L2000×W900×H600mm |
| |
Maximum packaging size: |
L500×W200×H400mm |
| |
Voltage: |
Three-phase three-wire system 380V/50Hz |
| |
Total power: |
Heating power 24kwh, intermittent working heating power 20kwh, transmission motor power 0.75kw, wind motor power 0.75kw |
| |
Dimensions: |
L3000×W1200×H1900mm |
| |
net weight: |
About 800kg |
| |
|
|
| Device model: Automatic PE Film Shrinkage Machine |
| Accessories |
Brand |
Brand origin |
Model parameter |
| PLC |
Delta |
Taiwan |
|
| Main switch |
CHNT |
China |
NF30-CS(40A) |
| Film feeding gear motor |
TONGYU |
China |
0.09KW-NMR |
| Feeding gear motor |
TONGYU |
China |
0.75KW-NMR |
| Photoelectric switch |
ROKO |
Taiwan |
MMF-DU10N |
| Electromagnetic valve |
AIRTAC |
Taiwan |
4V210-08 |
| Thermostat |
TOKY |
Zhongshan |
TE4-RB10 |
| Device model: PE film shrinking chamber |
| Accessories |
Brand |
Brand origin |
Model parameter |
| Wind motor |
ESPA |
Taiwan |
0.75KW-NMR |
| Conveyor |
ESPA |
Taiwan |
0.75KW-NMR |
| worm speed reducer |
ESPA |
Taiwan |
WPA-60(1:60) |
| Frequency converter |
Delta |
Taiwan |
SE-20071A |
| Main power switch |
CHNT |
China |
NF63-CW |
| Thermostat |
TOKY |
Zhongshan |
TE7-SB10 |
| Stainless steel heating tube |
Stainless steel |
Korea |
1200W/pcs |
| High temperature resistance chamber cloth |
TACONIC |
Korea |
TACNOIC |
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Audited Supplier 
){kind=link}